IKO enertherm ALU TG

IKO enertherm ALU is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality reflecting ALU cladding consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity.

Edge finish:

Straight

Tongue and groove (TG)

Download technical data sheet

Rooftop: flat roof insulation for timber, concrete and steel deck.
Sarking: pitched roof insulation (type nF with neutral felt).
Floor: floor insulation (underfloor heating and concrete floors).
Wall: cavity wall insulation.
Wrap: outside wall insulation (closed joints).
Comfort: loft insulation.

Bulk density: ± 32 kg/m3
Compressive strength at 10% deformation: 175 kPa (17,5 ton/m2)
Behaviour under uniformly distributed loading: class C (≤ 5 % deformation at 80 °C and 40 kPa loading)
Closed cells: more than 95%
Water vapour diffusion: PIR foam: μ = 60 – ALU facing: μ > 100,000

Fire class according to EN 13501-1: Class F
Fire class ‘end use’ according to 13501-1: B-s2,d0 (steeldeck)
Fire class according to BS 476 – p7 : Class 1

Europe: CE – EN 13165: T2-DS(70,90)3-DS(-20,-)1-DLT(2)5-TR80 (≤ 140mm) TR40 (> 140 mm)-CS(10Y)175 WL(T)1
Belgium: ATG 2726 – ATG 2727 – ATG H867
France: Certificat Acermi N° 06/103/434 DTA 5/13-2350
Netherlands: Komo Attest met Productiecertificaat CTG 485 Komo CTG 544