Building physics calculation

IKO Building physics calculation

The building physics characteristics of a building are essential as they determine the building’s energy consumption and comfort. The calculation is a theoretical assessment of whether or not a condensation problem exists or may occur. In addition, the current and/or desired insulation value of the roof system is determined.

In order to be able to make the requested calculations for you, we need the details below. Please fill out the below form as completely as possible. This will enable us to help you with the calculation quickly and efficiently!

Each calculation is a proposal and must be checked by the customer before ordering and before execution.

If you would like support in completing this calculation form or if you want specific advice on this calculation, please contact your IKO advisor.

"*" indicates required fields

Company*

Contact*

E-mail*

Address*

Postal code*

City*

Telephone*

Project name*

Project Location*

IKO Contact*

The building’s indoor climate class*

For example: home, school, business hall, …

Type of fastener applied in the case of a mechanically fastened system

Entire roof structure of the existing situation (including ceiling, air cavity,…) from outside to inside with thickness in mm*

For example: top layer of 4 mm + bituminous underlay of 3 mm + PIR insulation with ALU coating of 140 mm + bituminous vapour barrier of 3 mm + steeldeck type 106 + air cavity of 200 mm + airtight suspended ceiling of 12 mm

Complete roof structure of the new situation (including ceiling, air cavity,…) from outside to inside with thickness in mm*

For example: bituminous top layer of 4 mm + bituminous underlay of 3 mm + PIR insulation with ALU coating of 140 mm + bituminous top layer of 4 mm + bituminous underlay of 3 mm + PIR insulation with ALU coating of 140 mm + bituminous vapour barrier of 3 mm + steeldeck type 106 + air cavity of 200 mm + airtight suspended ceiling of 12 mm

Upload structure section*

Drop files here or

Accepted file types: jpg, png, pdf, Max. file size: 10 MB.

Message

Comments

This field is for validation purposes and should be left unchanged.